Warranty Policy
NAVEE provides after-sales service to customers in accordance with the relevant laws and regulations of the sales region. This policy applies to NAVEE products.
1. Scope of Application
NAVEE provides warranty services for products sold through official or officially authorized channels. Products purchased through unauthorized channels are not covered by this policy.Products purchased within a country are eligible for warranty services only in the country of purchase. If the product is purchased within any EU member state, the warranty service applies across all EU member states.
2. Warranty Service
2.1.If a product exhibits non-human-induced quality issues within a certain period from the date of purchase, and after confirmation by NAVEE personnel or authorized personnel, NAVEE will provide warranty service. The warranty period for the machine and parts is as follows:
Type | Part Name | Warranty Coverage |
Main Unit |
Frame assembly |
Due to product-related performance failures that cannot be repaired, such as open circuits, desoldering, fractures, and distortions, replacements can be made. Damage caused by impacts, unauthorized modifications, or other human-induced factors is not covered by the warranty. |
Motor assembly |
Due to product-related performance failures (such as coil phase loss, burnout, demagnetization or detachment of magnetic steel, and deformation of the wheel axle), which cannot be repaired, replacements can be made. However, damage to the wheel hub caused by insufficient tire pressure over speed bumps, potholes, or similar reasons is not covered by the warranty. |
|
Hub |
Due to product-related performance failures that cannot be repaired, such as open circuits, desoldering, fractures, and distortions, replacements can be made. However, damage to the wheel hub caused by insufficient tire pressure over speed bumps, potholes, or similar reasons is not covered by the warranty. |
|
Controller assembly |
Due to product-related performance failures that cannot be repaired, replacements can be made. However, damage caused by unauthorized modifications or other human-induced factors is not covered by the warranty. |
|
Instrument assembly |
Performance failures caused by product-related issues that cannot be repaired are eligible for replacement. However, damage resulting from unauthorized modifications or other human-induced factors is not covered by the warranty. |
|
Front fork |
If a product-related issue causes performance failures, oil leaks, or other problems that cannot be repaired, the product can be replaced. However, damage caused by collisions or other human-induced factors is not covered by the warranty. |
|
Shock Absorber Assembly |
Failures due to product quality issues (such as shock absorber failure, oil leakage, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Folding Assembly |
Due to product-related performance failures that cannot be repaired, such as open circuits, desoldering, fractures, and distortions, replacements can be made. However, damage caused by impacts, unauthorized modifications, or other human-induced factors is not covered by the warranty. |
|
Stem assembly |
If a product-related performance failure cannot be repaired, such as open circuits, desoldering, fractures, or distortions, the product can be replaced. However, damage caused by impacts, unauthorized modifications, or other human-induced factors is not covered by the warranty. |
|
Vertical tube |
If a product-related performance failure cannot be repaired, such as open circuits, desoldering, fractures, or distortions, the product can be replaced. However, damage caused by impacts, unauthorized modifications, or other human-induced factors is not covered by the warranty. |
|
Main | Battery | If there is leakage or the capacity is less than 80% due to product quality issues, a |
Components |
replacement can be made. Damages caused by unauthorized modifications or other human factors are not covered under the warranty. Damage resulting from improper storage, failure to charge in a timely manner, use of non-standard chargers, water ingress, impacts, or drops will not be covered by the warranty. |
|
Head light |
Failures such as non-illumination or insufficient brightness caused by product quality issues are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. |
|
Turn signal |
Non-illumination or insufficient brightness caused by product quality issues are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. |
|
Taillight |
Failures such as non-illumination or insufficient brightness due to product quality issues are eligible for replacement. However, damages caused by unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. |
|
Throttle |
Failures caused by product quality issues (such as malfunction, sticking, uneven acceleration, electrical failures, or physical damage) are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. |
|
Turn signal switch | Failures caused by product quality issues (such as switch malfunctions, electrical failures, or physical damage) are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. | |
Brake handle |
Failures caused by product quality issues (such as unresponsive or sluggish handles, mechanical failures, or physical damage) are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. | |
Charging port assembly | Failures caused by product quality issues (such as poor contact at the charging port, electrical failures, or physical damage) are eligible for replacement. However, damages resulting from unauthorized modifications, improper use, or accidents (such as crashes) are not covered under the warranty. | |
Headset Bearings |
Failures due to product quality issues (such as bearing failure, severe wear, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Charger + Power Cord |
Failures due to product quality issues (such as charging faults, overheating, short circuits, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Wearable Parts |
Decorative Cover | Failures due to product quality issues (such as detachment, cracking, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
Foot pad |
Failures due to product quality issues (such as damage, severe wear, or warping) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Reflector |
Failures due to product quality issues (such as loss of reflective effect, damage, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Handlebar grip | Failures due to product quality issues (such as damage or severe wear) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. | |
Front/Rear fender | Failures due to product quality issues (such as damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. | |
Kickstand |
Failures due to product quality issues (such as inability to properly support, looseness, or physical damage) can be replaced. However, damage caused by unauthorized modifications, improper use, or external factors is not covered by the warranty. |
|
Drum/Disc brake | Failures due to product quality issues (such as brake failure, uneven wear, or physical damage) can be replaced. However, damage caused by unauthorized modifications, |
improper use, or external factors is not covered by the warranty. | ||
Inner tire |
Failures caused by product quality issues (such as abnormal air leakage or physical damage) are eligible for replacement. However, tire blowouts caused by insufficient tire pressure when going over speed bumps, potholes, or punctures, as well as minor air pressure drops (5-10 PSI) during normal use, are not covered under the warranty. |
|
Outer tire |
Failures caused by product quality issues (such as cracking, abnormal wear, or physical damage) are eligible for replacement. However, damages resulting from improper use, aggressive driving, burnouts, extreme situations such as punctures, or crashes are not covered under the warranty. |
|
Tubeless Tire |
Failures due to product quality issues (such as tire cracking, abnormal wear, or manufacturing defects) can be replaced. However, damage caused by unauthorized modifications, improper use, aggressive driving, burnouts, or external factors (such as road damage, sharp objects, etc.) is not covered by the warranty. Minor air pressure reduction (5-10 PSI per month) during normal use and slow air leaks leading to wheel hub rust due to long periods of inactivity are not covered by the warranty. |
The warranty period starts from the day after the date indicated on the invoice. For online orders, the warranty period starts from the day after the product is signed for. If the customer cannot provide a valid proof of purchase, the warranty period is calculated as 3 months from the product’s production date.
2.2 Warranty Process
3. Non-Warranty Coverage
Warranty services will be terminated in the following situations:
- The damaged parts have exceeded the warranty period;
- The customer cannot provide a warranty card or invoice, or the information on the warranty card does not match the invoice;
- The product is damaged due to human factors, such as crashes, aggressive driving, etc.; Confidential, disclosure forbidden;
- The product is damaged due to force majeure, such as fire, earthquake, flooding, etc.;
- The product is damaged due to improper use, maintenance, or adjustment by the user, contrary to the user manual;
- The product is used under conditions beyond normal use, causing malfunction or damage;
- The product is disassembled or repaired by personnel or service centers not authorized by NAVEE;
- The warranty card or product information is deliberately damaged, including scratching, tearing, or alteration;
- Other malfunctions and damages not caused by product design, manufacturing, or quality issues; 10.The product is used for commercial purposes (such as rental or sharing services);
- Routine maintenance of the scooter (such as brake adjustments, tire inflation, etc.) is not covered under the warranty. If the user opts to have such maintenance performed at a service center, the relevant costs will be charged.